Description
With a simple Click Tailcap, the Elzetta Alpha A112 produces an astonishing 535 lumens of neutral-tint white light.
The beam of the Elzetta Alpha A112 is projected through a solid acrylic optical lens that generates a soft-edge beam that no reflector-based flashlight can replicate. Power is provided by a single CR123A battery (included), or one RCR123 rechargeable cell. The intuitive click switch works like a ballpoint pen providing momentary activation with a light press and latches for constant-on operation when depressed further. There are no secondary modes in the tailcap. Full output is obtained every time the light is activated.
When using a high drain IMR RCR123 cell, the Alpha Gen3 A112 unleashes a 10-second burst of 800 lumens before the output is subtly tapered off over a period of approximately 30 seconds, then regulated to a constant 535 lumens. This subtle tapering is designed intentionally, so as to not distract the user with a sudden drop in luminosity during critical operations. The burst mode resets every time the power is cycled off and back on again, so the burst mode can be more easily perceived after the light has been on for at least 20-30 seconds, then cycled off and back on again.
When using a primary CR123 cell as fuel, the A112 will produce a 10-second burst of 535 lumens, then subtly regulate down to a constant 435 lumens.
A high frequency strobe is now fully integrated into the head and can be activated by double-tapping the switch. Simply cycle the light off to disengage the strobe function.
NOTE: There is no “High/Strobe” tailcap for Alpha Gen3! Strobe mode is integrated into the head and is activated with a simple double-click of the switch on ANY tailcap. DO NOT USE ALPHA GEN2 “HIGH/LOW” OR “HIGH/STROBE” WITH ALPHA GEN3! IT WILL DESTROY THE GEN2 TAILCAPS!
Made in USA to the highest standards and guaranteed forever.
Click “Additional Information” for detailed technical specifications (lumens, candela, etc).
