Description
The Elzetta Alpha A122 is intended for indoor and very close range applications.
With a simple Click Tailcap, this small Elzetta Alpha A122 LED flashlight generates a low-intensity 535 lumens of neutral-tint white light. The beam is projected through a solid acrylic flood lens producing a uniform wall of light with a soft-edge that gradually fades into the environment. The intuitive click switch works silently like a ballpoint pen providing momentary activation with a light press and latches for constant-on operation when depressed further. There are no secondary modes in the tailcap.
When using a high drain IMR RCR123 cell, the Alpha Gen3 A122 unleashes a 10-second burst of 800 lumens before the output is subtly tapered off over a period of approximately 30 seconds, then regulated to a constant 535 lumens. This subtle tapering is designed intentionally, so as to not distract the user with a sudden drop in luminosity during critical operations. The burst mode resets every time the power is cycled off and back on again, so the burst mode can be more easily perceived after the light has been on for at least 20-30 seconds, then cycled off and back on again.
When using a primary CR123 cell as fuel, the A122 will produce a 10-second burst of 535 lumens, then subtly regulate down to a constant 435 lumens.
A high frequency strobe is now fully integrated into the head and can be activated by double-tapping the switch. Simply cycle the light off to disengage the strobe function.
NOTE: There is no “High/Strobe” tailcap for Alpha Gen3! Strobe mode is integrated into the head and is activated with a simple double-click of the switch on ANY tailcap. DO NOT USE ALPHA GEN2 “HIGH/LOW” OR “HIGH/STROBE” WITH ALPHA GEN3! IT WILL DESTROY THE GEN2 TAILCAPS!
Made in USA. Lifetime Guarantee.
Click “Additional Information” for detailed technical specifications (lumens, candela, etc).
